Damon Colpo, College of Optical Sciences – University of Arizona, Vishnu Reddy, Lunar and Planetary Laboratory – University of Arizona, Sameep Arora, Aerospace and Mechanical Engineering – University of Arizona, Scott Tucker, Starizona, Lindsie Jeffries, Biomechanical Engineering – University of Arizona, Doug May, Aerospace and Mechanical Engineering – University of Arizona, Ryan Bronson, College of Optical Sciences – University of Arizona, Evelyn Hunten, Electrical and Computer Engineering – University of Arizona
Keywords: Education, Telescope, Instrumentation
Abstract:
Traditional academic SSA research has relied on commercial off the shelf (COTS) systems for collecting metric and lightcurve data. COTS systems have several advantages over a custom built system including cost, easy integration, technical support and short deployment timescales. We at the University of Arizona took an alternative approach to develop a sensor system for space object characterization. Five engineering students designed and built two 0.6-meter F/4 electro-optical (EO) systems for collecting lightcurve and spectral data. All the design and fabrication work was carried out over the course of two semesters as part f their senior design project that is mandatory for the completion of their bachelors in engineering degree. The students designed over 200 individual parts using three-dimensional modeling software (SolidWorks), and conducted detailed optical design analysis using raytracing software (ZEMAX), with oversight and advice from faculty sponsor and Starizona, a local small business in Tucson. The components of the design were verified by test, analysis, inspection, or demonstration, per the process that the University of Arizona requires for each of its design projects. Methods to complete this project include mechanical FEA, optical testing methods (Foucault Knife Edge Test and Couder Mask Test), tests to verify the function of the thermometers, and a final pointing model test. A surprise outcome of our exercise is that the entire cost of the design and fabrication of these two EO systems was significantly lower than a COTS alternative. With careful planning and coordination we were also able to reduce to the deployment times to those for a commercial system. Our experience shows that development of hardware and software for SSA research could be accomplished in an academic environment that would enable the training of the next generation with active support from local small businesses.
Date of Conference: September 19-22, 2017
Track: Poster